Most Recently Updated Products

Hadef 9/12 VA Stainless Steel Hand Chain Hoist, 500kg to 3000kg

Reid "T Davit" Lightweight and Portable Davit, for Lifting or Man-Riding Applications (Model Dependant)

JDN Profi TI Hydraulic Chain Hoist, Hook Suspended - Range from 3000kg to 100,000kg

These are supplied as standard with capacities from 3t up to 100t. Depending of motor size the hoists work with an intake pressure of 100 bar up to 180 bar. Pressure fluids: Oil or HFC.
Our hydraulic hoists can be employed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are already in place.

JDN Profi EH Series Hydraulic Chain Hoist With Power Travel Trolley - Range from 20,000kg to 100,000kg

These are an alternative to a pneumatic hoist that has very quiet operation and particularly suitable for application in explosion-endangered areas.

Available in 20,000kg, 25,000kg, 37500kg, 50,000kg, 75,000kg, 100,000kg.

Spring Recoil Power Supply Festoon for Electric Chain and Wire Rope Hoists with cables lengths from 5.5m to 26m

Series 5K & 7K Cable Reels have an external case manufactured from shock resistant plastic and are suitable for applications both with cable manually controlled and fitted on machines with automatic cable retraction. This range of drums features a ratchet stop every 50cm which can be easily disconnected if constant traction of cable is required. All slip rings have brass rings and brushes. Series 6K Cable Reels are similar to the above but have an external case manufactured from die cast aluminium.

Wedge Shaped Lifting Bucket, Hoist Mounted from 45 litre to 120 litre Capacity.

This product is designed for lifting materials using a scaffold hoist.

Options are available in the following capacities: 45 litre, 90 litre or 120 litres

Vetter 'UNI-End Buffer' Universal End Stops, Sold in Pairs, To fit Flange Width 91mm to 300mm

JDN "Profi TI Subsea" Pneumatic Air or Hydraulic Chain Hoist - For Use Under Water - 3200kg and 6300kg

Standard units can be used to depths of 55 metres, however these units are also available to be used down to a water depth of 70m. Highly regarded as a very versatile hook suspended tool, they can also be used for horizontal and oblique use. Other capacities are available on request.

Available as air or hydraulically powered units, with variable speed control and overload protection as standard.

LiftingSafety "Load Release" Remote Hook-Clamp - Range 590kg to 70 tonne (Higher capacities available on request)

Compact Aluminium Scaffold Tower 0.6m to 6.1m Platform Heights

Yale "CPS" Lightweight Electric Chain Hoist, 1Ph / 3Ph - 125kg or 250kg

A small and light weight (only 12kg when 3m HOL) Industrial quality electric chain hoist. Electrical protection to IP54 as standard with low voltage pendant control and overload protection. Smooth operation. Thermally protected hoist duty motor with dual braking system and rugged cast aluminium alloy hoist frame, 5:1 factor of safety yet small, compact design for industrial applications. Hardened forged steel latch-style lower hook rotates 360°.

Ridgegear RGH3 Unisex 2-point EN361 Safety Harness

Ridgegear "RGH5" 3-Point Fall Arrest & Rescue Harness to EN361 and EN1497

Ridgegear "RGH2 Glow" High Visibility Two Point Fall Arrest Harness to EN361

Ridgegear "RGH2 Deluxe" Two Point EN361 Fall Arrest Safety Harness

Ridgegear "RGH2 Comfort" Two Point Fall Arrest Harness to EN361

Ridgegear "RGH2 Eco" Environmentally Friendly Two Point EN361 Fall Arrest Harness

Ridgegear RGH16 "Multitask" Rope Access Fall Arrest Harness with Work Positioning Belt

Ridgegear RGH16 Multi Task Harness is a further innovation of the Ridgegear range of safety harness. For fall arrest the harness comprises front and rear D rings. In addition there is the added benefit of 2 side D work positioning D rings on a comfortable support pad, and a further ventral front D ring positioned at the waist for sit suspension and / or work positioning. Leg straps are opened using lightweight adjustable quick click buckles, which allow for easy and quick step-in facility. Comfort leg pads are also provided.

Ridgegear "RGH4" Four Point Fall Arrest and Work Positioning Harness

Ridgegear RGH4 4 Point Harness includes all of the features of the RGH1-3 harnesses, (see data sheets).This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas. The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

Ridgegear "RGH2" Two Point Fall Arrest Harness to EN361

Ridgegear RGH2 Two Point Harness is the workhorse of the industry. The harness is fitted with a rear dee and a chest mounted front dee. This harness can be used similar to the RGH1 but has the added feature of the front dee ring to extend the working capability of the harness. The harness is fully adjustable and  lightweight and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

Ridgegear "RGH1" Single Point EN361 Safety Harness

The RGH1 Single Point Harness is a basic access harness fitted with a rear dee only. This harness is used primarily with a fall arrest lanyard to provide an operative with basic fall protection. The harness is fully adjustable and lightweight and is fitted with rip stitch indicators.

Crosby 'S265' Weld-On Pivot Link Load Ring. Lifting or Lashing Eye, WLL Range from 1000kg to 15,000kg

SAR Alpine Stretcher Steel Construction for Civil rescue or Mountain rescue.

The flat bed style of the Alpine stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, giving far more casualty care. Having skies under the stretcher is another added advantage over the basket type as they keep the casualty clear of the ground reducing the feel of debris, rocks and stones etc if required to be sledged. The alpine stretcher is made from 16 swg mild steel tube powder coated. Available in two different types, civil rescue and mountain rescue design, both can have accessories - Alpine stretcher wheel, alpine 1.2m Stretcher lifting straps, alpine head guard, and alpine handles.

Codipro "DSR" Double Swivel Ring, Metric or Imperial Thread. Capacities from 70kg upto 9000kg

Thread Sizes Available: M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M36 and M42.

Imperial (UNC) Thread Sizes Available: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1/8" and 1-1/4".

Single Cylinder Lifting Trolleys, Capacity 150kg

Tractel "Minifor TR" Electric Wire Rope Lifting Hoist. 230v, 110v and 400v Options - Range from 100kg to 500kg

Features include: Unlimited length of hoist cable adapted to the requirement, WLL 100 kg to 950 kg, integral handle for easy carrying,
suitable for building sites, fast setup, unloaded wire rope freely suspended or optional rope reeler, pendant control or radio operation,
direct lift or sheaving kit for increased capacity and a single phase or 3 phase motor.

Tractel TR Minifor Lifting Hoist with Spring Loaded Cable Reeler. 230v, 110v and 400v Options - Range from 100kg - 950kg

Features include: Unlimited length of hoist cable adapted to the requirement, spring loaded reeler, WLL 100 kg to 950 kg, light, easy to handle aluminium alloy design, integral handle for easy carrying, suitable for building sites, fast setup, efficient operation with swivelling suspension hook, extremely good weight/power ratio, reduced maintenance and pendant control or radio operation.

Tractel "Tirak" Wire Rope Lifting Hoists. 230v and 400v Options - Range from 300kg to 3000kg (non man-riding version)

Tirak X Series has an unlimited height of lift because the wire rope is not stored in the machine, centrifugal brake for controlled descent in case of power failure and pendant control with up/down and emergency stop.

Lighter than the T-series, the X-series are most suited for bosun's chairs, inspection harnesses, one-man cradles and light suspended platforms.

Tractel Tirak Mobile Lifting Hoist In Heavy Duty Frame with Cable Reeling Drum - Range from 300kg to 3000kg

The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope.  Features include: Terminal switch for limiting the height of lift wherever desired, emergency lowering in power failure at a controlled speed, electrical system suitable for use on building sites, easy to operate push button pendant control and heavier loads can be handled using winch with snatch blocks. Full safety features including limit switches and release/lower facility.

Tractel Twin Sheave "Double In-line" Aluminium Pulley

Tractel Single Sheave "Standard S" Pulley - Fixed Flanges

Lightweight and compact. Suitable for lifting and load deviations.

High strength. Can be coupled with a mechanical ascender.

Tractel Single Sheave "Standard S" Pulley - Opening Flanges

The Standard S pulley is for use with specific short-term applications(lifting or hoisting)

It is a light-weight, high-strength device, which is easy to use, thanks to swing side plates.

Tractel Single Sheave "Standard M" Pulley - Opening Flanges

The Standard M pulley is for use with specific short-term applications(lifting or hoisting)

It is a light-weight, high-strength device, which is easy to use, thanks to swing side plates.

Tractel Twin Sheave "Double Pulley" , Opening Flanges , Braided Rope Max. Dia. 16mm

Tractel "Ascent Clamp" (foot loop) in Adjustable Webbing Strap

The handle, equipped with an ascending loop used with a rope clamp, enables independent upward movement along a rope.

The rope clamps are used independently for rope manoeuvres.
The ascending loop is made of 20 mm PA strap, adjustable from 0.80 to 1.60 m.